Location

Pol. Bergondo (A Coruña)

Phone

(+34) 981 62 19 55
CONTACTAR
Phone:(+34) 981 62 19 55
Where we are:Pol. Bergondo (A Coruña)
  • es
  • en
  • fr
  • pt
    • CONTACT

    Jumbo LT paint booth

    High performance for large formats

    Contact us

    The Jumbo LT booth has been developed to meet a wide range of needs across various sectors, such as transport (lorries, coaches, railways), the marine industry, or any other application requiring space, power and efficiency.

    Its versatile design and high air flow rates allow for independent and safe use in multiple production processes. Furthermore, it incorporates a range of configurable options that make it even more adaptable to each customer’s requirements.

    The Jumbo LT model differs from the Jumbo F paint booth in that it features a rear air outlet with a dry filter curtain, designed to provide high-flow air extraction whilst ensuring adequate air cleaning prior to discharge to the outside, offering greater flexibility in terms of its location and operation. This feature makes it particularly useful when the installation of an air extraction pit or tunnels is not feasible, such as in the case of large, heavy or irregularly shaped parts.

    The main advantage of the Jumbo LT paint booth is that it requires no structural work for installation, making it easy to set up in any workshop; however, it has a larger footprint in terms of length and produces a higher noise level than the Jumbo F model, although its price is lower than that of the L and F versions.

     

    Cabina Jumbo L

    Jumbo LT, the compact paint booth with rear air exhaust that requires no structural work for installation.

    Jumbo L18 model

    Key aspects

    The following details relate to the Jumbo L18 model:

    Good lighting makes all the difference when it comes to painting. That is why, at Fercabin, we prioritise a neutral visual environment, free from shadows and dark areas, to ensure the product is applied evenly.

    To optimise performance, we fit electronic ballasts as standard, which reduce the energy consumption of fluorescent tubes by up to 50%.

    In addition to the financial savings, this improvement contributes to sustainability, with an estimated reduction of 3.7 tonnes of CO₂ per year, according to the IDAE (2012).

    Our cabins are fitted with heavy-duty fans mounted on high-quality bearings. This technical configuration ensures:

    • Greater strength and durability, even under heavy use.
    • Quieter operation over time
    • Fewer breakdowns and less preventive maintenance.

    A robust and reliable solution that improves the overall performance of the equipment.

    The air recirculation system in our paint booths operates using pneumatic dampers, a more efficient alternative to conventional electrical systems. Thanks to this system:

    • This ensures a truly airtight seal, preventing leaks and dangerous build-ups of paint in the boiler.
    • Significant fuel savings are achieved (up to 50%) and cycle times are reduced by 40%. Greater safety, lower consumption and increased productivity.

    Unlike traditional boilers, our Jumbo units are fitted with dual-circuit boilers, designed to maximise thermal efficiency. This technology enables:

    • A 30% reduction in energy consumption, with optimised usage.
    • A reduction in emissions of up to 12 tonnes of CO₂ per year.
    • An actual saving of approximately 3,600 litres of fuel per year.

    A key improvement in both costs and environmental impact.

    The Jumbo L paint booth model allows for the addition of optional modules, which make it easier to carry out tasks more efficiently, comfortably and safely.

    • Intermediate section
    • Passenger lifts
    • Vehicle lifts
    • Retractable roof for access via overhead crane

    Technical specifications

    Logo de Fercabin

    Customizable options

    Burners

    One of the most innovative solutions, with installed capacity tailored to specific requirements.

    They are used to heat large volumes of air for use in drying processes, but can only operate within an air stream of a certain velocity.

    The combustion gases are mixed with the air to be heated, thereby achieving 100% performance.

    This type of equipment features modular flame adjustment from 0 to 100%, allowing for precise temperature control with minimal fluctuations.

    Quemador vena de aire

    These burners stand out for their versatility and are available in a range of power ratings, from 60 to 260 kW.

    Their stable operation and high thermal capacity ensure optimum performance during the drying process, allowing them to be used with a wide variety of products and finishes without any loss of efficiency.

    Quemador de gasoil

    Gas burners, with outputs ranging from 35 to 280 kW, offer an alternative to diesel burners in locations where gas is available as an energy source.

    These burners also provide the oven chamber with sufficient power to ensure rapid and uniform drying of any product being processed, regardless of its composition.

    Quemador de gas

    Propulsion units

    Recognising the importance of space, this option minimises the footprint of the booth by positioning the blower unit at the top of the paint booth.

    Flow rates:

    • 1,22047e+9 – 1,46457e+9 in3/h 
    • 1,83071e+9 – 2,07481e+9 in3/h
    • 2,19685e+9 – 2,44095e+9 in3/h
    • 2,68504e+9 – 2,92914e+9 in3/h

    Grupo de impulsión superior

    The recirculation system has been designed with the energy efficiency of our products in mind. This enables us to save time and fuel, resulting in cost savings of around 30% compared to the same equipment without this feature.

    This system consists of a set of pneumatic dampers that operate in synchronisation to reuse the heat generated in the cabin, solely during the drying phase. It is important that this system is pneumatic, as electric actuators are unable to provide sufficient force to ensure a complete seal between working phases.

    Flow rates:

    • 1,22047e+9 – 1,46457e+9 in3/h 
    • 1,83071e+9 – 2,07481e+9 in3/h
    • 2,19685e+9 – 2,44095e+9 in3/h
    • 2,68504e+9 – 2,92914e+9 in3/h

    Grupo de impulsión superior

    Designed with simplicity in mind, this equipment is positioned on the side of the paint booth at ground level, allowing direct and convenient access to all components.

    Flow rates:

    • 1,22047e+9 – 1,46457e+9 in3/h 
    • 1,83071e+9 – 2,07481e+9 in3/h
    • 2,19685e+9 – 2,44095e+9 in3/h
    • 2,68504e+9 – 2,92914e+9 in3/h

    Grupo de impulsión lateral sin recirculación

    Designed with simplicity in mind, this equipment is positioned on the side of the paint booth at ground level, allowing direct and convenient access to all components.

    The recirculation system has been designed to optimise the energy efficiency of our equipment, directly benefiting the end user. Thanks to this system, there is a significant reduction in process times and fuel consumption, which can result in cost savings of up to 30% compared to equivalent equipment without this feature.

    The system incorporates a set of pneumatic dampers that operate in a coordinated manner, allowing the heat accumulated inside the booth to be reused exclusively during the drying phase. Pneumatic actuation is essential, as electric actuators do not provide the necessary force to ensure a completely airtight seal between the different work phases.

    Flow rates:

    • 1,22047e+9 – 1,46457e+9 in3/h 
    • 1,83071e+9 – 2,07481e+9 in3/h
    • 2,19685e+9 – 2,44095e+9 in3/h
    • 2,68504e+9 – 2,92914e+9 in3/h

    Grupo de impulsión lateral con recirculación

    Extraction units

    Air purification units are the only option when it comes to eliminating odours caused by the application of paints, varnishes or lacquers. These extraction units must be matched to the supply unit and extract air whilst purifying it in three stages:

    The first stage, in which primary filters remove the largest particles; the second stage, where up to 98% of the remaining airborne particles are removed; and the final stage, where odours are trapped. In this way, the booth can operate in a closed-loop system, renewing only a small percentage of the air, or discharge the air to the outside free of particles and with a significant reduction in odours.

    Flow rates:

    • 1,83071e+9 – 2,92914e+9 in³/h

    Depuradora de aire

    These groups correspond to the supply air groups; in this way, we achieve optimal cabin pressurisation, which can be regulated either automatically or manually via a manual damper that we adjust based on the readings displayed on a differential pressure gauge, which is always included with this option.

    Flow rates:

    • 1,83071e+9 – 2,92914e+9 in³/h

    ATEX CAT II options , for all the extraction described.

    Grupo de extracción

    High-efficiency helical extraction units, designed for demanding industrial ventilation systems, based on equipment from Sodeca and Soler & Palau.

    • TRD* series medium-pressure centrifugal exhaust fans.
    • Power ratings from 1.1 kW to 4 kW with approximate flow rates of 5,0039e+8 to 1,04961e+9 in³/h.
    • Units designed for use in ducts with medium resistance and for continuous operation at temperatures up to 120 °C, depending on the configuration.
    • Certificado AtexATEX Category II certification is available for installations where there is a risk of explosive atmospheres.

    Please refer to the manufacturers’ technical data sheets for detailed information on the configurations and specific features of each model.

    Would you like more information about our range of Jumbo LT booths?

    Tick box
    Logo Fercabin, Cabinas de pintura
    Powered by  GDPR Cookie Compliance
    Privacy Overview

    This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.